Have a question? Hopefully it’s answered here. If not, contact us
Yes, Aquamura is completely waterproof as long as it has been fitted as per the fitting guide and thoroughly sealed where required – See fitting guide.
Yes, as long as the tiles are sound and not loose, and we would always recommend a mechanical fix (screw) through the shoulder of the groove directly into the wall behind.
No, the panels must be fitted after the installation of the bath and/or shower tray, so the panels sit on the bath/shower tray, instead of running down behind.
Yes, it is recommended to use all the Aquamura Trims.
No, unfortunately they are not recommended for these purposes.
Always use a non-abrasive cloth, with hot soapy water (mild detergents) – Avoid all abrasive products.
Battens should be run horizontally – For more information please refer to our fitting guide.
There are two options for jointing boards on a straight wall. You can either use the tongue and groove system, using the matching colour sealant in the joints. Or you can use square cut boards with continuous jointer trims (H section trims) – Refer to fitting guide for more info.
Aquamura panels can be cut with typical wood working tools – hand and power tools – For more information please refer to the fitting guide.
We are the manufacturers of the product our distributors put Aquamura in 100’s of their stockists stores, where you can see in person and order.
See our stockists and distributors page here, where you will easily be able to contact them to find a stockist with a showroom within driving distance.
Absolutely! Live on this website is a “samples request system”, built into the the Range page. Simply chose up to six samples. Add them to your “basket” and then put in your delivery address.
We’ve compiled on the specifications page a lot of the technical information. We will be happy to schedule a call to talk through the suitability of Aquamura for your project.
